產品概況：
ZZD-BXS固體丙烯酸漿料是一種合成的丙烯酸類聚合型紡織漿紗專用輔助漿料。經過對丙烯酸類單體的科學選擇，優良配伍生產的該產品，它具有優良的成膜性、漿膜高彈、柔軟、且耐磨，對親水性纖維及疏水性纖維均有著極高的粘附性，因此可廣泛作為純棉、滌棉、滌粘及中長類紗線的經紗上漿的輔助漿料。使用該成品可改善漿液性能，提高上漿質量，充分帖伏毛羽，保證漿膜完整度，大幅度提高織造效率。
理化性能：
外觀：淡黃色微顆粒
粘度：6-15mpa.s(NDJ 10% 95℃ 1h)系列，可控+2mpa.s
PH值：5-7
有效成分：≥86%
主要優點：
1. 提高漿膜完整度、改善分紗性能，可大大降低漿紗二次毛羽、使織造開口清晰、提高織造效率，特別適合于細支高密品種及無梭高速織機的織造生產。
2. 吸濕性得到改善，無回粘現象。
3. 提高漿膜彈性、韌性及伸度，增加耐磨性。
4. 充分提高PVA和淀粉混合漿的性能，上漿均勻。
5. 溶液均勻，穩定性好，長時間存放不分層。
6. 溶與冷水，退漿方便且極易退凈。
使用方法：
調漿：將ZZD-BXS漿料與其他漿料一起投入調漿桶后，按常規方法調即可。
用量：對主漿料的干重的2%-10%
包裝：牛皮紙，塑膜復合包裝，每袋25Kg+0.1Kg.
ZZD-BXS Solid Acrylic Size
Product Overview：
ZZD - BXS solid acrylic paste
is a synthetic compound of acrylamide textile sizing support for
slurry. It has an excellent film, serous high-elastic, flexible and
wear-resistant, natural fibers and blended yarn has high adhesion. As a
result of extensive cotton, polyester and cotton, and the length of
Polyester and Viscose yarn warp sizing assisted by slurry. The product
can be used to improve slurry performance, sizing quality,
full-hairiness affixed to ensure integrity of the serosa, substantially
improve the efficiency of weaving.
Physical and Chemical Properties：
Appearance Ginger micro-particles
Viscosity 6-15mpa.s (NDJ 1h 10% 95 °C) series controllable±2 mpa.s
PH 5-7
Effective components ≥ 86%
The major advantages :
1.
To improve the performance of yarn, raising serous integrity can be
greatly reduced sizing hairiness, a clear opening to the weaving,
improve the efficiency of weaving, which are particularly suited to
small and high density species and Spinning Weaving Loom high demand.
2. Hygroscopicity to improve, to stick with the phenomenon.
3. Raising serous flexibility, toughness and tenacity, increasing wear resistance.
4. Four full of PVA and starch performance, improve compatibility of uniform sizing.
5. Soluble in cold water, desizing convenient and easy to retreat net.
6. Uniform solution, good stability, not long tiered storage.
Use：
Transfer pulp slurry will ZZD - BXS together with other input-pulp
slurry barrels, according to conventional methods can transfer slurry.
The main content of the slurry dry weight of 5% -20%
Packaging ：
Kraft paper, packaging Plastic Composites,25kg/bag±0.1kg/bag